My RC Camera Car

It's been a while since my last post. The last few days though have been rather productive;

Using an old road-sign and a few nuts and bolts I have managed to make a radio controlled camera platform for my iPod out of an RC car I've had in the loft since I was a kid.

The first stage was bending the cover plate for the chassis which was simple enough. I then cut a hole in it and mounted a servo on springs to damper an excess movement. I then made a 'tank turret' out of an old camera lens to keep the camera level whilst panning. Another servo was mounted on a 'C' shaped piece of aluminum to control the tilt. finally I made a little case for my iPod and Android phone out of a perspex sample I had left over from my degree.

Now I made this I can adapt it to take different cameras such as the Cannon 550d.

Afro Samuari - Kuma Prop

Ok, so this is what i have been working on for the past few days....

....Now all i have to do is work on the mold and casting processes.

A really complicated wall!

Wow, building a stone wall with brick quoins the rain is hard. I am enjoying it though. Tomorrow I will re-lay the three bricks on the top right and then start another side.
Meanwhile in the shed I am starting my Halloween costume. Expect a post about that within the next few days.

Twisted Arch

I think a few of you might like this one.

 First of all i had to build two twisted piers, the bit of plywood above is used to plumb down to to maintain the twist. (I had to cut the square out of the middle.)

 Me posing in front of a job well done.

 I have not got much money, so i printed out all the plans on my home printer. The above image is of the 1:1 scale plans of the brick boxes being stuck down ready for cutting.

 then they get screwed together with my faithful Makita screwdriver.

 The bricks then go in the brick boxes and are marked ready for cutting.

 Yeah, it was messy!

 I put two screws in the board so the bricks didn't slip.

 I only cut about a third of the bricks needed here.

 A random picture of my plans.

 the arch former I designed is assembled and the brick boxes showing where the bricks will go.

 Ready for the build.

 When building any arch you need to build it up evenly from each side.

Nearly there.

 Finished.

It's amazing what you can build with a Cauliflower; Happy days!

Coffee Table; Part Three

Here Is some photo's of the table. Hopefully like me you get the impression that it relates to the light cast by the fan from the first post of this project.

I will just re-post it.

Coffee Table; Part Two

The Making Of My Coffee Table.

 Here I am gluing strips of plywood together to create the table top.

 The strips were made three at a time using a template to mark the cut.

 like this.

 Here they are being clamped glued and tied together on a former to ensure a square leg.

 the layers were pinned down using scrap timber and folding wedges.

 some of the looser sections were tied together with spacers in to avoid warping.

 This is what it ended up looking like.

 in this photo you can see that i started to fill in the other end of the table with hundreds of tiny bits of plywood.

Until I managed to use bigger bits.

 The Other leg was made with the plywood running the same way as the previous image

 Then It was sanded.

 This was a test assembly, with a lot of sanding in between.

 Then I used Varnish and six coats of beeswax to build up the finish.

Next, Coffee Table; Part Three, the photo shoot

Coffee Table; Part One

For a part of my Degree Work I decided to make a table.

This Is the finished Result, Below is some of the sketches that i used to get to this!

I initialy started to look at the similarity's between the Chinese and Spanish. I found that I liked the way the light fell on the hand fans. I knew I wanted to encorporate this into furniture somehow. 
Eventualy I came up with the Sketches below.

This was me playing with the form and chucking a few new ideas in the mix. For example the table on the bottom right would have included an EL-Tape stripe.

This is close to the final design, I drew this from a card model I made. If you like Sketch Models look for the post called 'Shadow Puppet'.

There it is, now all i did was refine it on the computer (Form-Z) and print the plans. 


The next post will be the making of the table.