My RC Camera Car

It's been a while since my last post. The last few days though have been rather productive;

Using an old road-sign and a few nuts and bolts I have managed to make a radio controlled camera platform for my iPod out of an RC car I've had in the loft since I was a kid.

The first stage was bending the cover plate for the chassis which was simple enough. I then cut a hole in it and mounted a servo on springs to damper an excess movement. I then made a 'tank turret' out of an old camera lens to keep the camera level whilst panning. Another servo was mounted on a 'C' shaped piece of aluminum to control the tilt. finally I made a little case for my iPod and Android phone out of a perspex sample I had left over from my degree.

Now I made this I can adapt it to take different cameras such as the Cannon 550d.

Afro Samuari - Kuma Prop

Ok, so this is what i have been working on for the past few days....

....Now all i have to do is work on the mold and casting processes.

Coffee Table; Part Three

Here Is some photo's of the table. Hopefully like me you get the impression that it relates to the light cast by the fan from the first post of this project.

I will just re-post it.

Coffee Table; Part Two

The Making Of My Coffee Table.

 Here I am gluing strips of plywood together to create the table top.

 The strips were made three at a time using a template to mark the cut.

 like this.

 Here they are being clamped glued and tied together on a former to ensure a square leg.

 the layers were pinned down using scrap timber and folding wedges.

 some of the looser sections were tied together with spacers in to avoid warping.

 This is what it ended up looking like.

 in this photo you can see that i started to fill in the other end of the table with hundreds of tiny bits of plywood.

Until I managed to use bigger bits.

 The Other leg was made with the plywood running the same way as the previous image

 Then It was sanded.

 This was a test assembly, with a lot of sanding in between.

 Then I used Varnish and six coats of beeswax to build up the finish.

Next, Coffee Table; Part Three, the photo shoot

Coffee Table; Part One

For a part of my Degree Work I decided to make a table.

This Is the finished Result, Below is some of the sketches that i used to get to this!

I initialy started to look at the similarity's between the Chinese and Spanish. I found that I liked the way the light fell on the hand fans. I knew I wanted to encorporate this into furniture somehow. 
Eventualy I came up with the Sketches below.

This was me playing with the form and chucking a few new ideas in the mix. For example the table on the bottom right would have included an EL-Tape stripe.

This is close to the final design, I drew this from a card model I made. If you like Sketch Models look for the post called 'Shadow Puppet'.

There it is, now all i did was refine it on the computer (Form-Z) and print the plans. 


The next post will be the making of the table.

The Little Boat That Could

One of the Clients where I work commissioned me to mount a little boat she found on a local beach. So I sourced a suitable piece of driftwood from my store of random but interesting objects, Then cut and sculpted it so that it resembled a wave.  I love this little thing, I didn't want to give it to her. You can see why below!

 Who needs Instagram, when you have a decent camera!

 I just like this shot

 I love the way the wood looks like a wake.

 I positioned the boat at an angle to imply that it's sailing in choppy conditions

 No Design would be complete with out a plan view.

 I like the way the boat is missing some paint and the wood is weathered. It's almost like the two were meant to be displayed together.

A card I designed Just in case she wanted anything else doing.

 These felt pads were made from the felt pad nails you can buy from a tool shop that go on the bottom of chairs to protect the floor.

 I made the underneath of the wave with a Dremel and a using a cutoff wheel.

Oh, It looks like the little boat sank in this picture; it was perfect on my computer. Oh well it looks good!

Shadow Puppet

Here is a little Airplane I for use as a shadow puppet for a production of 'The Thirty Nine Steps'. Enjoy!

 I used a couple of photos of a Tiger Moth for the form, then I used a Hot Melt Glue Gun to sculpt the parts!

 Then I stuck it together using little wooden rods.

The company liked this and I enjoyed making it. happy days!

Past Costumes

Ok, I think I am going to start this blog off with my older works!

 This Is A Zombie Undertaker costume I made last Halloween. Complete with Prosthetic scars. I won a local fancy-dress competition for this!

 Before that I made a Grim Reaper Banksy Costume, for about £5. (I totally forgot I was going out)

This was cool, It's a Steampunk uniform for a party at New-Years Eve. I won a prize for this.